About RF-Toolbox Pro
Specialized on high frequency electronics for RF professionals, radio amateurs and students. RF-Toolbox is based on the popular Electronic Toolbox by Marcus Roskosch. This app contains some of the common tools of Electroni
Specialized on high frequency electronics for RF professionals, radio amateurs and students.
RF-Toolbox is based on the popular Electronic Toolbox by Marcus Roskosch.
This app contains some of the common tools of Electronic Toolbox but contains a wide range of additional tools, specialized for high frequency electronics, RF professionals, radio amateurs and students.
Currently RF-Toolbox consists of more than 90 tools and like Electronic Toolbox, there are more to come over the time.
Feature list:
■ PCB Trace Width (Internal and external Traces)
■ PCB Trace Resistance
■ PCB Trace Impedance (various trace types e.g. Microstrip, embedded Microstrip, Symmetric and Asymetric Stripline, Wire Microchip, Wire Stripline, Edge Coupled Microstrip and Stripline)
PCB Crosstalk (Microstrip and Stripline)
■ LC L/T/Pi Match calculation
■ Coax Cable calculation (Standard and individual Types)
■ Amplifier and Attenuator cascade calculation
■ SWR / Reflection / Return loss conversion
■ Power Divider (Branchline, Ratrace and Wilkinson)
■ Capacitor Plate calculation
■ RLC Parallel, Series and Circuit calculation
■ Noise Figure conversion
■ Skin Depth calculation (various materials from Aluminum to Silver)
■ Butterworth Filter (also with plot of filter chart)
■ Chebyshev Filter (also with plot of filter chart)
■ R-C, L-C, R-L High/Low/Band-Pass Filter
■ RF Units conversion (quick conversion of frequently used units)
■ Air coil inductance calculation
■ Resistors, Capacitors, Inductors in Parallel / Series
And there is much more...
■ Aktive Filter calculation tool
■ Antenna calculation tool
■ Delta Star calculation
■ Cable length / ampacity tool
■ PTC / NTC Temperature Resistance conversion
■ AC Ohms law tool
■ Zener diode circuit calculation
■ Constant current source tool
■ ASCII Table
■ Desktop calculator
■ Resistor/Capacitor/Inductor combinations tool
■ 4-20mA conversion tool ■ Passive cooling calculator
■ Audio Oscilloscope
Please check out more screen shots on my website (WEBSITE Link on the left side).
If you have questions, please feel free to contact me by using the Support button here, inside the App or on my website.
Thank you!
Marcus Roskosch
Sep 12, 2022
Version 14.5.01
This update includes the following changes and fixes:
◉ Further improvements for a next iOS Version
◉ Some bug fixes and improvements
◉ Several changes under the hood
Thanks for your great support and feedback which helps to further improve this App.
Please use the Contact Developer feature inside the App to contact me in case of questions or issues.
Stay safe and healthy!
Best regards,
Marcus
Previous Versions
Here you can find the changelog of RF-Toolbox Pro since it was posted on our website on 2016-09-24 14:33:24.
The latest version is 14.5.01 and it was updated on 2024-04-22 17:25:26. See below the changes in each version.
RF-Toolbox Pro version 14.5.01
Updated At: 2022-09-12
Changes: Sep 12, 2022
Version 14.5.01
This update includes the following changes and fixes:
◉ Further improvements for a next iOS Version
◉ Some bug fixes and improvements
◉ Several changes under the hood
Thanks for your great support and feedback which helps to further improve this App.
Please use the Contact Developer feature inside the App to contact me in case of questions or issues.
Stay safe and healthy!
Best regards,
Marcus
RF-Toolbox Pro version 14.0.4
Updated At: 2020-12-07
Changes: Dec 7, 2020 Version 14.0.4
This update fixes a few remaining minor issues.
Best regards,
Marcus
RF-Toolbox Pro version 14.0.3
Updated At: 2020-11-03
Changes: Nov 3, 2020 Version 14.0.3
This update fixes a remaining iOS 14 bug where some images were not displayed correctly.
Best regards,
Marcus
RF-Toolbox Pro version 13.0.1
Updated At: 2019-11-26
Changes: Nov 26, 2019 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus
RF-Toolbox Pro version 9.3.1
Updated At: 2013-01-20
RF-Toolbox Pro version 13.0.1
Updated At: 1970-01-01
Changes: 26 de nov. de 2019 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus
RF-Toolbox Pro version 13.0.1
Updated At: 1970-01-01
Changes: 2019年11月26日 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus
Disclaimer
Official App Store Link
We do not host RF-Toolbox Pro on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for RF-Toolbox Pro is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
